R125 Crawler
(150-600mm|6-24″)
The Sewer Robotics R125 crawler is easily transformed from a powerful reinstatement cutter to a water jet cutter, just by swapping modules in less than 60 seconds.
The HA125 reinstatement cutter has a decent clearance inside relined 150mm (6”) pipelines and can be used inside pipelines up to 500mm (20”) with its 205 mm (8”) ram lift.
The 90-degree cutter motor pivot and ram lift are hydro-pneumatically actuated for maximized durability, force and precision without hydraulics inside the robot.
The durable R125 is easy to service and features a powerful cutter motor, great camera visibility with lens cleaner and very precise and operator friendly controls.
Although most contractors appreciate the added power, low maintenance costs and easy upgrading to water jet cutting, there might be jobs where a water supply is not desired or silence more appreciated.
SEWER ROBOTICS cutters can be used with powerful water driven, pneumatic or silent electric cutter motors.
| Drive | Benefits |
|---|---|
 Water | + Extreme power + Low maintenance costs + Upgrade to water jet cutting |
 Air | + No water supply required |
 Electric | + Single cable + Silent + No water supply required |
Scope of use : 150 – 500mm (6-20”)
Cutting motor : WM300 – Water
: PM300 – Pneumatic
: EM300 – Electric
Movements : 4-axis
Drive : AWD – Electric
Rotation (pan) : 500° – Electric
Ram lift : 205mm(8”)
: Hydro-pneumatic
Cutter pivot (tilt) : 90°- Hydro-pneumatic
Lighting : Intensity adjustable LEDs
Lens cleaner : Compressed Air
: Water
Weight : 5,1kg (11.2lbs)
Lenght : 342mm (13.5”)
Scope of use : 150 – 600mm (6-24”)
Max. pressure : 3000 bar (43,500 psi)
Movements : 4-axis
Drive : AWD – Electric
Rotation (pan) : 500° – Electric
Ram lift : 210mm (8”)
: Hydro-pneumatic
Nozzle pivot (tilt) : 110°- Hydro-pneumatic
Camera rotation : Infinite
Lighting : Intensity adjustable LEDs
Lens cleaner : Compressed air
Length : 350mm (13.7”)
Weight : 5kg (11lbs)
The CAM125 module connects the CAMTRONICS ZRK70 HD Pan & Tilt inspection camera with the Sewer Robotics R125 crawler for quick HighDefinition pre- and post inspections.
The CAM125 module features a pan & tilt camera and a pressure adjustable air coupling at the front, operated from the control unit to connect with most available spot repair packers in the market.
Scope of use : 150 – 500mm (6-20”)
Drive : AWD – Electric
Video : Analog HD
: 1080p, 30fps (recorded)
Internal storage : 32 GB
Camera pan : Infinite
Camera tilt : 230°
Focus : Manual
Lighting : Intensity adjustable LEDs
Location transmitter : 512 Hz
Inspection software : WINCAN (WRc, NASSCO)
: POSM (NASSCO)
Air pressure : Max. 10 bar (145psi)
Length : 158mm (6.2”)
Weight : 1,6kg (3.6lbs)
The multi-functional and heavy-duty, stainless steel, R125 crawler has a very slim 100mm (4”) body for maximized clearance inside 150mm (6”) pipelines.
The R125 features the twist-and-lock mechanism to exchange various job-specific equipment modules within 60 seconds and is compatible with SEWER ROBOTICS’ mobile and vehicle integrated control units, cable- and hose reels.
Scope of use : 150 – 600mm (6-24”)
Drive : AWD – Electric
Rotation (pan) : Infinite – Electric
Length : 405mm (16”)
Body diameter : 100mm (3.9”)
Weight : 15kg (33lbs)
The gripper accessory is compatible with all water driven lateral reinstatement and water jet cutting jobspecific modules. It has 3 replaceable ‘fingers’ that can be closed to grab and remove solid debris and
other undesired objects from pipelines.
The closing force of the gripper’s fingers is controlled by adjusting the pressure of the high-pressure
power pack.
Without delicate exterior parts and with a diameter of only 100mm (4”).
Its durable and short design provides ease of deployment from tight manholes and sufficient clearance to reach far inside pipes.
Of the electric movements (driving and rotating) allow operators to drive to the job fast. Then reduce the speed to maximize precision.
Convert the reinstatement cutter into a
UHP Water jet cutting- or CCTV inspection
robot within 60 seconds.
The available, purpose-build, modules
widen the robot’s application range, while
UHP water jet cutting provides access to
a niche market with high rates and low
competition.
A wide-angle camera with continuously
adjustable LED lighting is placed directly
behind the cutter and easily cleaned with the
on-demand lens cleaner.
The powerful WM300 water hydraulic cutter motor cuts rapidly through cast iron, concrete and CIPP liner material and leaves a smooth cut.
After removing the cutter motor, an (UV) spot repair packer can be attached via a “puck” coupling.
The 205mm (8”) ram lift and 90° cutter motor pivot provide a very wide application scope from 150 – 500mm (“6-20”) and are realized by hydro-pneumatic actuators.
These in-house developed, linear actuators are operated with compressed air and have an enclosed hydraulic circuit to combine the strength and precision of hydraulic cylinders with the convenience and serviceability of pneumatic actuators without hydraulics inside the robot.
Water jet cutting uses a targeted high pressure water blast, precisely applied and continuously monitored, to remove roots, cement, grout, concrete, failed liners and mineral deposits without adding damage to the host pipe.
The position of the 90-degree, swivelling, nozzle connection ensures a wide application scope and maximized visibility during the operation.
The R600 has a powerful linear actuator to raise the boom, cleaning arm or dome.
This actuator is operated with compressed air and features an enclosed hydraulic circuit to combine strength and precision.
Thank you for your online demonstration request.
Your preferred date and time will soon be reviewed and login to the online meeting shared. We are looking forward to meeting you.
Best regards,
Sewer Robotics
info@sewerrobotics.com
+3174 289475
+1 503 504 8474
